Semi-automatic line for factory SIP gluingModel UIP-6M-3K "Kompakt"
UIP-6M-3K is a combined hydraulic press with semi-automatic adhesive application system that has every feature for full-cycle factory SIP production. All-welded metal frame made of 100mm profile pipe gives firmness and durability to the whole construction and prevents deformation.
The press is equipped with semi-automatic adhesive application system. Adhesive is applied to glued surface only, which leaves SIP grooves clean. Amount and speed of adhesive application can be adjusted as necessary. The system has parking oil bath for adhesive-applying slat. The bath provides impermeability of the system and prevents adhesive from drying up during downtime.
Hydraulic press is equipped with its own hydro-station. Four hydrocylinders provide pressure needed. Pressure amount is regulated from control board with manometer. The press also has a timer that allows setting exact processing time.
Panels are laid manually by unit staff. Panels must be placed upon supports located on vertical press racks, which eliminated misplacement or offsets during pressuring.
| Nominal capacity, panels per shift | 80 (250-280 sq.m.) |
| Gluing options | OSB, CBP board, Greenboard, Glass sheet, Plywood, Galvanized panel and others |
| Combined with | Polystyrene, Mineral wool plate, Basalt slab |
| Operating height of load, mm | Up to 900 |
| Space requirements, meters | 5,00 х 2,5 |
| Operating temperature, oC | Minimum 12 (recommended 18) |
| Plug-in power, kW | Up to 8 |
| Voltage, V | 380, triphase |
| Energy consumption, kW/h | Up to 3 |
| Special foundation | Not needed |
| Water supply | Not needed |
| Wait staff, pax | 2-3 |
| Adhesive application mode | Semi-automatic, injector |
| Injectors number, ps | 30-36 |
| Adjusting adhesive application speed and amount | Available, from control board |
| Pressuring time-exposure control | Available, from control board |
| Press type | Hydraulic |
| Hydrocylinder, pc | 4 |
| Pressure level control | Available, from control board |
| Pressure frame | All-welded, based on square 100mm profile piple |
| Adhesive type | One-component polyurethane moisture-curing adhesive (TOP-UR-6w or analogue) |
| Shipping dimensions, mm | 5 000 х 2 000 х 2 500 |
| Weight, kg | 1300 |
| Guarantee, months | 12 |
Since 2006 over 95* line units distributed in Russia and worldwide.* - information updated on September 01, 2016