Design, engineering and production of technological equipment and machinery for low-rise frame and panel housing

SIP production line unit
Model UIP-6M
Maximum performance

SIP production line unit. Model UIP-6M (maximum performance)

UIP-6M machine is a semi-automatic line for sandwich structural insulated panel gluing in factory conditions using a conveyor method. The heart of the machine is the hydraulic press made of 100mm profile pipe and equipped with its own hydraulic station. Pressure and pressing time-exposure are control panel adjusted. The press has a "Polystyrene" and a "Mineral Wool" pressing modes.

Gluing stationary operates both in manual and semi-automatic modes. Adhesive is only applied on the adhesive-subject surface. Amount and speed of adhesive application can be adjusted as necessary.

Panel formation board is equipped with supports, upon which OSB and polystyrene are stowed. Supports can be adjusted to needed depth of the panel groove.

Delivery of shaped panels and issuance of finished SIP's are made with the smooth "start-stop" system shaft.

SIP production line unit. Model UIP-6M (maximum performance) SIP production line unit. Model UIP-6M (maximum performance) SIP production line unit. Model UIP-6M (maximum performance) SIP production line unit. Model UIP-6M (maximum performance)
UIP-6M semi-automatic line for factory sandwich SIP gluing
Nominal capacity, panels per shift 240 (750-840 sq.m.)
Gluing options OSB, CBP board, Greenboard, Glass sheet, Plywood, Galvanized panel and others
Combined with Polystyrene, Mineral wool plate, Basalt slab
Operating height of load, mm up to 450
Space requirements, meters 21,00 х 5,0
Operating temperature, oC Minimum 12 (recommended 18)
Plug-in power, kW up to 8
Voltage, V 380, triphase
Energy consumption, kW/h up to 3
Special foundation Not needed
Water supply Not needed
Wait staff, pax 3-4
Adhesive application mode Semi-automatic, injector
Injectors number, ps 36
Adjusting adhesive application speed and amount Available, from control board
Pressuring time-exposure control Available, from control board
Press type Hydraulic
Hydrocylinder, pc 8
Pressure level control Available, from control board
Pressure frame All-welded, based on square 100mm profile pipe
Adhesive type One-component polyurethane moisture-curing adhesive (TOP-UR-8w or analogue)
Weight, kg 4500
Guarantee, months 12
Complete delivery set contains
  1. Adhesive application stationary
  2. Panel formation board
  3. Hydraulic press
  4. Hydrostation
  5. Delivery board

Since 2006 over 95* line units distributed in Russia and worldwide.
* - information updated on September 01, 2016